| Step | | Procedure & Parts & Tools |
| 1 |
|
Turn the machine off and disconnect batteries.
|
| 2 |
|
Using a T20 torx socket wrench, remove the 3 screws from the handle cover.
| Torx T20 |
|
|
| 3 |
|
Pull to remove the handle cover.
|
| 4 |
|
Using a T20 torx socket wrench, remove the 6 screws holding the handle mechanics in place.
| Torx T20 |
|
|
| 5 |
|
Slide the handle mechanics out of the handle compartment. Note: This machine is equipped with a Hall Sensor, which means this control board must be put in the correct place or this machine will not move forward.
|
| 6 |
|
Reverse process to install new handle mechanics.
|